Pier Block - S120B
The height of Cast Stone Gate Piers from HaddonStone can be varied according to the number of centre shaft units used.
If the Gate Piers are to be infilled with concrete the shaft sections should be lined with 25mm (1") Styrofoam or similar to act as an isolating medium. It is most important to refer to the relevant HaddonStone Technical Sheet to ensure correct installation.
When ordering please note that each gate pier course is supplied in two halves. Both halves of each gate pier course need to be ordered.
HaddonStone’s Gate Piers can enhance a gateway, Entrance or Entranceway further with a HaddonStone Cast Stone finial or a ball and base.
|Weight||33 Kg||73 lb|